Skip to main content
فهرست مقالات

Enhanced physical properties of the anodic TiO2 nanotubes via proper anodization time



Vertically aligned titanium dioxide (TiO2) nanotubes were synthesized by electrochemical anodic oxidation in an electrolyte solution containing 0.45 wt% ammonium fluoride (NH4F) and 2 vol% deionized water at constant potential (70 V) for various anodization time at the room temperature. The influence of the anodization time on the morphology and optical properties of the anodic TiO2 nanotubes have been studied. Field emission scanning electron microscopy results revealed that the anodic TiO2 nanotube morphology extremely depends on the anodization time. It was observed that by increasing anodization time, length of the anodic TiO2 nanotubes increased and nanotubes destroyed at the top of the tubes. After a long time of anodization process (9 h), nanotubes completely destroyed. Photoluminescence measurements showed that the anodic TiO2 nanotube band gap energy depends on the anodic TiO2 nanotube morphology. The anodic TiO2 nanotubes without any damage had a minimum band gap energy (2.9 eV).

کلیدواژه ها:

morphology ، Band gap ، TiO2 nanotube ، Anodization time

برای مشاهده محتوای مقاله لازم است ورود پایگاه شوید. در صورتی که عضو نیستید از قسمت عضویت اقدام فرمایید.

لمشاهدة محتوی المقال یلزم الدخول إلی دخول الموقع.
إن كنت لا تقدر علی شراء الاشتراك عبرPayPal أو بطاقة VISA، الرجاء ارسال رقم هاتفك المحمول إلی مدير الموقع عبر

You should become a Sign in to be able to see articles.
If you fail to purchase subscription via PayPal or VISA Card, please send your mobile number to the Website Administrator via